FLUID MECHANICS  THEORY



In this section, the definitions of a system
and control volume are stated. The principle of conservation
of mass will be introduced. The conservation of mass equation
in integral form will be presented for both fixed and moving control volumes.






Definitions: System and Control Volume



A system is a fixed quantity of matter,
and no mass is allowed to cross the system boundary. A control volume
is a space of interest where mass can cross the boundary. The
boundary of the control volume is called the control surface.






Conservation of Mass Equation:
Fixed, Nondeforming Control Volume

Conservation of Mass
for a Control Volume
Outward Normal Vector 

As the name implies, the principle of conservation of mass states that mass is conserved for a system. Applying the conservation of mass principle for a fixed and nondeforming control volume:
The statement above can be easily expressed in mathematical form to yield the conservation of mass equation for a control volume as
where n is the outward unit normal vector, which is used to describe the orientation of the control surface. Hence the net mass flow out of the control volume is considered positive.
For steady flows, the total mass in the control volume will not vary with time, and the first term vanishes.
The second term in the conservation of mass equation represents the net mass flow through the control surface. For control volume with a finite number of faces, it is sometimes convenient to write it in discrete form as






where is the mass flow rate. This can also be written as,
where ρ is the density of the fluid, Q is the volumetric flow rate and is the average velocity perpendicular to the cross sectional area A.
If there is just one inlet and one outlet and the density does not change, which is common, this relationship is simply,
A_{1}V_{1} = A_{2}V_{2}




Pipe Flow with
Parabolic Velocity Profile 

The average velocity can be obtained by
Consider flow in a pipe as shown in the figure. The average velocity can be obtained by integrating the parabolic velocity profile to yield






Conservation of Mass Equation:
Moving, Nondeforming Control Volume




Relative Velocity 

The conservation of mass equation for a moving
and nondeforming control volume is the same as described above, but the
velocity V is
replaced with the relative velocity W.
From a stationary observer point of view, the control volume moves at a velocity V_{cv}, while the fluid moves at a velocity of V. W is the relative velocity of the fluid with respect to the moving control volume. These velocities are related by
V = W + V_{cv} 


