Search
 
 

THERMODYNAMICS - THEORY

 

 

For most substances, thermodynamic properties are presented in the form of tables because they are too complex to be expressed by simple equations.

In thermo-systems, many working fluids can be used. Water is one of the most common working fluids involved. It is the only liquid presented in this section.

The thermodynamic properties that are commonly used are:

  • Temperature (T), oC or oF
  • Pressure (P), Pa or psia
  • Specific volume (v) (the volume per unit mass), m3/kg or ft3/lb
  • Specific internal energy (u), kJ/kg or Btu/lb
  • Specific enthalpy (h), kJ/kg or Btu/lb
  • Specific entropy (s) (Which will be introduced in the following section), kJ/(kg-K) or Btu/(lb-R)
     
    Saturated Liquid and Saturated Vapor

Saturated Water Table

 


Saturated Water Temperature Table

Saturated Water Pressure Table

 

At a given pressure, the temperature at which a pure substance changes phase is called the saturation temperature. At 1 atm, the saturation temperature of water is 100 oC. At a given temperature, the pressure at which a pure substance changes phase is called the saturation pressure. At 100 oC, the saturation pressure of water is 1 atm. The saturation temperature and saturation pressure depends on each other.

There are two types of tables for saturated water. Both tables give the same information. The only difference is that the properties are listed either as a function of temperature or pressure.

The properties listed in the tables include

  • Saturation pressure (Psat) for a given temperature or saturation temperature (Tsat) for a given pressure
  • Specific volume of saturated liquid (vf) and saturated vapor (vg)
  • Specific internal energy of saturated liquid (uf), saturated vapor (ug), and vaporization (ufg = ug - uf)
  • Specific enthalpy of saturated liquid (hf), saturated vapor (hg), and vaporization (hfg = hg - hf) or latent heat of vaporization.
  • Specific entropy of saturated liquid (sf), saturated vapor (sg), and vaporization (sfg = sg - sf)
     
    Saturated Mixture


 

During the vaporization process of water, the substance is a mixture of saturated liquid and saturated vapor. Quality (x) is defined to describe the fraction of saturated vapor in the mixture.

      x = mvapor/mtotal

where
      mvapor = mass of vapor in the mixture
      mtotal = total mass of the mixture
               mtotal = mliquid + mvapor = mf +  mg

Quality has a value between 0 and 1. x equals 1 for saturated vapor and x equals 0 for saturated liquid according to its definition.

Saturated mixture is a two-phase system. For convenience, it can be treated as a homogenous mixture and the properties of this mixture is simply the average properties of the saturated liquid and saturated vapor. For example, the specific volume of the mixture can be determined by

     

Quality is related to the horizontal distance on T-v diagram
 

      Vav = Vf + Vg
      mtotal vav = mf vf + mg vg
      vav = mf vf/mtotal + mg vg/mtotal
           = vf (1 - mg/mtotal) + vg mg/mtotal
           = vf (1 - x) + vg x
           = vf + vfg x

Rearranging the above equation to give an expression for the quality x as

      x = (vav - vf)/vfg

Based on this equation, quality can be determined from the horizontal distance on the T-v or P-v diagram as shown in the figure.

The above process can be repeated for u and h.

      uav = uf + ufg x
      hav = hf + hfg x

     

  Superheated Vapor


Superheated Water Table

 

Superheated Steam Table

 

Since the superheated vapor is a single phase substance, the temperature and pressure are independent. In the superheated vapor tables, the properties are listed as a function of both the temperature and pressure. The tabulated properties include v, u, h and s. The saturation temperature corresponding to the pressure is given in the parentheses following the pressure value.

Superheated vapor can be characterized by

  • P < Psat at a given T
  • T > Tsat at a given P
  • v > vg at a given P or T
  • u > ug at a given P or T
  • h > hg at a given P or T
     
    Subcooled Liquid


Subcooled Water Table

 

The format of the subcooled liquid water tables is similar to the format of the superheated vapor tables. In the absence of compressed liquid data, a common practice is to use the saturated liquid data based on the given temperature to estimate the properties of compressed liquid. For h, the error can be reduced using the following approximation

      

Subcooled liquid can be characterized by

  • P > Psat at a given T
  • T < Tsat at a given P
  • v < vf at a given P or T
  • u < uf at a given P or T
  • h < hf at a given P or T